POWERSET8

SKU: POWERSET8

  • High-quality complete set: 10 kW hybrid inverter for photovoltaic systems.
  • 2 MPPT trackers maximise the output of your PV modules
  • Emergency power function on 3 phases for 16.28 kWh of battery storage
  • The inverter is protected against dust and water jets with protection class IP 65
  • WiFi app for monitoring and controlling your system
19.999,99 €

incl. 19% VAT , plus shipping costs

Manufacturers recommended retail price: 21.935,00 €
(Save 8.82%, i.e. 1.935,01 €)

Delivery time: 43 Workdays

Available from: 15.11.2022 (Pre-orders possible)

Description

POWERSET8 domestic power plant with emergency power function (3 phases) and battery storage to consume the electricity generated by the sun during the day at night.

With this set, you can generate your own electricity and use the excess energy to charge the battery or switch on consumers (heating element). In the evening, the self-generated electricity from the battery is available. In this way, you can save a large part of your electricity costs. The components are optimally coordinated and can be connected via Plug & Play. If the photovoltaic panels are optimally aligned, you will generate approx. 440 kWh per panel per year. With 24 panels, this results in 10,560 kWh. At an electricity price of 40 cents/kWh, this would be an electricity saving of up to 4,224 € per year. Thus, the system pays for itself in less than 5 years.

The simple installation of this system is demonstrated in this video.

Scope of delivery

  • 1 x HKW10-0P3 10 kW hybrid inverter - emergency power on 3 phase - with or without grid feed-in
  • 3 x BSM48106H-51.2V106Ah battery storage 16.28 kWh total capacity
  • 24 x high-performance photovoltaic panel SP415-01 with a very good efficiency of 22.2 %. In total, the photovoltaic output is 9,960 kWp.
  • 6 x 120A-25mm2 battery connection cable
  • 1 x B-rack cabinet for 3 BSM48106H-51.2V106Ah and HVBOX
  • 52 x DH01 Roof Hook Frankfurter Pan
  • 12 x EK30 End clamp for 30 mm solar Panel
  • 3 x EKL01 Earthing clamp
  • 42 x EP35 earthing plate
  • 1 x HVBOX for BSM48106H-51.2V106Ah
  • 42 x MK30 centre clamp for 30 mm solar Panel
  • 33 x MS173 mounting rail 173 cm
  • 52 x NUT8-25 M8 screw with holder 25 mm
  • 1 x PVFUSE2 Fuse for 2 PV strings 1.000V
  • 2 x PV-MC4 connector set for solar cable
  • 2 x SKR40 Solar cable 6 mm2 red 40 m
  • 2 x SKS40 Solar cable 6 mm2 black 40 m
  • 33 x SV150 rail connector 150 mm

The roof mounting material was calculated for a roof with a frankfurt pantile with a rafter spacing of 70 cm and a rafter width of 8 cm. The photovoltaic modules can thus be mounted in 3 rows of 8 modules each.

The product meets the requirements of VDE-AR-N 4105, among others.

10 kW Hybrid inverter HKW10-0P3

This highly efficient hybrid inverter is suitable for private and commercial photovoltaic systems with an output of up to 10 kWp and a high-voltage battery storage System.

The power feed into the grid can be set variably between 0% and 100%. Operation without mains feed is possible.

The power data can be conveniently read on the unit or on the app.

In conjunction with the BSM48106H-51.2V106Ah battery storage included in this set, the energy generated during the day is stored and can then be consumed at night.

The 3-phase emergency power function: In the event of a power failure, the hybrid inverter switches off the grid and switches to island mode. Within approx. 6 seconds after the power interruption, three phases in the domestic grid are supplied with power again. All relevant emergency power consumers, such as heating and lighting, can thus be connected to different phases. In island operation, all three phases are supplied with power until the batteries are empty.

The hybrid inverter is black-start capable. If the batteries are empty, the inverter switches off and restarts without mains power as soon as the PV modules have recharged the batteries. As a rule, the system generates enough power even in winter to keep the heating and lights working all the time.

Technical data

Input power

  • Maximum input power (DC): 13000W
  • Maximum input voltage (DC): 1000V
  • Maximum input current: 13 A
  • Nominal voltage: 360V
  • Number of MPP trackers: 2
  • Strings per MPP tracker: 1

Output power

  • Peak efficiency: 98.2%
  • Maximum efficiency on battery charge: 97.5%
  • Maximum efficiency at battery discharge: 97.5%
  • Maximum output power: 10000W
  • Nominal output voltage: 230V
  • Nominal output current at 230V: 15.8A
  • Output frequency:50Hz/60Hz

Safety & Protection

  • Overvoltage protection: Yes
  • Magnetic insulation: Yes
  • Ground monitoring: Yes
  • Mains protection: Yes
  • Feed-in monitoring: Yes
  • Feedback current monitoring: Yes
  • fault current detection: Yes
  • Islanding protection: Yes
  • Overload protection: Yes
  • Overheating protection: Yes

Details

  • Operating temperature -35°C to +60°C
  • Length: 22 cm
  • Width: 53 cm
  • Height: 56 cm
  • Weight: 31 kg
  • Protection class: IP 65
  • Product warranty: 5 years

BSM48106H-51.2V106Ah Battery storage

The system can be upgraded to up to 42 battery storage units. In the best case, all batteries are commissioned at the same time, as the ageing effects will otherwise have a negative impact on the performance of the newer batteries. Please take this into account when calculating your electricity consumption.

Depending on availability, the model offered or an identical model with a different designation may be supplied.

Details:

  • Height: 13.3 cm
  • Width: 45 cm
  • Length: 41.2 cm
  • Weight: 48 kg

Technical data:

  • Battery type: Lithium iron phosphate (LiFePO4)
  • Total capacity: 5.42 kWh
  • Usable capacity: 4.88 kWh
  • Discharge efficiency (DoD): 90 %
  • Nominal voltage: 51.2 VDC
  • Nominal capacity: 106 Ah
  • Voltage range: 44.8 - 57.6 VDC
  • Life cycles: > 6000 (25°C)
  • Protection class: IP20
  • Communication interfaces: RS485, RS232, CAN
  • Operating temperature range: -10°C to 50°C
  • Storage temperature range: -20°C to 60°C
  • Product warranty: 5 years

KKT KOLBE high-performance solar module SP415-01

This premium PV module with 415 Wp output and a particularly high module efficiency of 22.2 % offers a better energy yield than modules with lower efficiency, even in low light conditions.

Thanks to the high performance and efficiency, you save up to 180,- EUR electricity costs per panel per year.*

The innovative shingle technology and the high load capacity reliably increase the output and minimise losses due to shading. Due to the 10 shingles arranged one above the other, only the shaded shingles do not generate electricity in the event of shading.

This module is equipped with PERC technology, which increases module efficiency: a special layer on the back of the module reflects part of the light back again. Particularly in weak and diffuse light in the morning and evening hours, modules with PERC technology achieve a higher Output.

The solar module's low temperature coefficient of -0.35 % guarantees optimal power output even on hot days.

The excellent anti-PID performance is prevented by optimised production processes and strict quality control to avoid power losses in humid weather.

The "Hot-Spot-Protect" quality assurance process guarantees that all shingles of the module are hot-spot free.

The PV panel is 164.6 cm long, 114 cm wide and 3 cm high. The tempered glass front panel with anti-reflective coating and the robust black aluminium frame ensure the best stability, even in strong winds (up to 2400 Pa) and heavy snow loads (5400 Pa). The module can be securely mounted using standard mounting systems. The mounting system is not included in the scope of delivery.

With the MC4 connector system, modules can be easily connected to each other.

The delivery is made by a forwarding agent free kerbside (the modules are not carried into the flat). The forwarding agent will contact you by e-mail to arrange a delivery date.

Notes:

  • Depending on availability, the model offered or an identical model with a different designation may be supplied.
  • Due to the currently very high demand, this item is usually sold out even before receipt of goods due to the advance sale.
  • Therefore, pre-order now at a favourable price and benefit from the currently relatively low purchase costs. The price may be higher at a later date.

Technical data PV module SP415-01

  • Cell type: PERC, monocrystalline
  • Number of shingles:: 10
  • Module size: 164.6 x 114 x 3 cm
  • Weight: 19 kg
  • Nominal power: 415 Wp
  • Nominal voltage: 38.7 V
  • Nominal current:10.73 A
  • Open-circuit voltage: 45.9 V
  • Module efficiency: 22.2
  • Outer pane: Tempered glass with anti-reflective Coating
  • Frame: Black Aluminium
  • Connection: MC4 compatible
  • Operating temperature: -40°C to +85°C
  • Temperature coefficient Pmax: -0.35 %/°C
  • Temperature coefficient Voc: -0.26 %/°C
  • Temperature coefficient Isc: +0.048 %/°C
  • NMOT: 43 ± 2 °C
  • Product warranty: 15 years
  • Performance guarantee: 30 years

How do I compare prices for PV modules?

The purchase price of PV modules is calculated in watts.

Example PV module from KKT KOLBE:

Purchase price: 259 €
Output: 415 Wp
Calculation: 259 € / 415 Wp = 0.62 €/Wp Price per Watt: ~0.62 €Wp

Competitor module:

Purchase price: 259 €
Output: 400 Wp
Calculation: 259 € / 400 Wp = 0.64 €/Wp

Pay attention to the module efficiency. This should be above 21%.

*The annual savings per panel were calculated on the basis of an output of up to 440 kWh per year and an energy price of 40 cents/kWh with optimal module orientation. With higher or rising electricity prices, the savings per photovoltaic module increase.

Safety note: This system may only be connected by a certified electrician.

Attributes

Power: 10000W
Features: Monokrystallin
Inverter technology: Hybrid
Pliability: Firm
System configuration: Hybrid

Reviews

Average item rating

Write the first review for this item and help others make a purchase decision!:

This item consists of
Hybrid Inverter HKW10-0P3

1 x Hybrid Inverter HKW10-0P3

3.999,99 € *
Appears on 15.11.2022
DH01 Roof hook Frankfurt pan

52 x DH01 Roof hook Frankfurt pan

12,99 € *
Appears on 31.10.2022
NUT8-25 M8 screw with holder 25 mm

52 x NUT8-25 M8 screw with holder 25 mm

1,19 € *
Appears on 31.10.2022
SV150 rail connector 150 mm

33 x SV150 rail connector 150 mm

2,29 € *
Appears on 31.10.2022
MK30 mid Clamp for 30 mm Solar Panel

42 x MK30 mid Clamp for 30 mm Solar Panel

2,19 € *
Appears on 31.10.2022
EK30 End Clamp for 30 mm Solar Panel

12 x EK30 End Clamp for 30 mm Solar Panel

2,19 € *
Appears on 31.10.2022
EP35 Grounding plate

42 x EP35 Grounding plate

0,39 € *
Appears on 31.10.2022
EKL01 ground clamp

3 x EKL01 ground clamp

2,49 € *
Appears on 31.10.2022
MS173 Mounting rail 173 cm

33 x MS173 Mounting rail 173 cm

19,99 € *
Appears on 31.10.2022
SKR40 Solar cable 6 mm2 red 40 m

2 x SKR40 Solar cable 6 mm2 red 40 m

99,99 € *
Appears on 31.10.2022
SKS40 Solar cable 6 mm2 black 40 m

2 x SKS40 Solar cable 6 mm2 black 40 m

99,99 € *
Appears on 31.10.2022
PV-MC4 Connector Set for Solar Cable

2 x PV-MC4 Connector Set for Solar Cable

2,49 € *
Appears on 31.10.2022
PV Module 415W SP415-01

24 x PV Module 415W SP415-01

259,99 € *
Appears on 02.11.2022
PVFUSE2 Fuse for 2 PV strings 1.000V

1 x PVFUSE2 Fuse for 2 PV strings 1.000V

19,99 € *
Appears on 24.10.2022