This offer already includes the VAT rate of 0% for photovoltaic products valid from 01.01.2023, as delivery will only take place in 2023.
POWERSET25 Home power plant with emergency power function (3 phases) and battery storage to use the electricity generated by the sun during the day at night.
With this set, you can generate your own electricity and use the excess energy to charge the battery or switch on consumers (heating element). In the evening, the self-generated electricity is available from the battery. In this way, you can save a large part of your electricity costs. The components are optimally coordinated and can be connected via Plug & Play. If the photovoltaic panels are optimally aligned, you will generate approx. 440 kWh per panel per year. With 24 panels, this results in 10,560 kWh. At an electricity price of 40 cents/kWh, this would be an electricity saving of up to 4,224 € per year. Thus, the system pays for itself in less than 4 years.
Scope of delivery
- 1 x HKW10-1P3 10 kW hybrid inverter - emergency power on 3 phase - with or without grid feed-in
- 1 x KKTHVB10.24 Battery storage 10.24 kWh total capacity
- 24 x high-performance photovoltaic panel SP415-01 with a very good efficiency of 22.2 %. In total, the photovoltaic capacity is 9,960 kWp.
- 52 x DH01 roof hooks Frankfurter Pfanne
- 12 x EK30 End clamp for 30 mm solar Panel
- 3 x EKL01 Earthing clamp
- 42 x EP35 earthing plate
- 42 x MK30 middle clamp for 30 mm solar Panel
- 33 x MS173 mounting rail 173 cm
- 52 x NUT8-25 M8 screw with holder 25 mm
- 2 x PV-MC4 connector set for solar cable
- 2 x SKR40 Solar cable 6 mm2 red 40 m
- 2 x SKS40 Solar cable 6 mm2 black 40 m
- 33 x SV150 rail connector 150 mm
The roof mounting material was calculated for a roof with a Frankfurter tile with a rafter spacing of 70 cm and a rafter width of 8 cm. The photovoltaic modules can thus be mounted in 3 rows of 8 modules each.
The product meets the requirements of VDE-AR-N 4105, among others.
10 kW Hybrid Inverter HKW10-1P3
This highly efficient hybrid inverter is suitable for private and commercial photovoltaic systems with an output of up to 10 kWp and a high-voltage battery storage system.
The power feed into the grid can be set variably between 0% and 100%. Operation without grid feed-in is possible.
The performance data can be conveniently read on the device or on the app.
In combination with the KKTHVB10.24 battery storage, the energy generated during the day is stored and can then be consumed at night.
The 3-phase emergency power function: In the event of a power failure, the hybrid inverter switches off the grid and switches to island operation. Within approx. 6 seconds after the power interruption, three phases in the domestic grid are supplied with power again. All relevant emergency power consumers, such as heating and lighting, can thus be connected to different phases. In isolated operation, all three phases are supplied with power until the batteries are empty.
The hybrid inverter is black-start capable. If the batteries are empty, the inverter switches off and restarts without mains power as soon as the PV modules have recharged the batteries. As a rule, the system generates enough power even in winter to keep the heating and lights working all the time.
- Maximum input power (DC): 15000W
- Maximum input voltage (DC): 1000V
- Maximum input current: 13 A
- MPPT voltage range: 180V - 850V
- Nominal voltage: 360V
- Number of MPP trackers: 2
- Strings per MPP tracker: 1
- Peak efficiency: 99.6%
- Maximum efficiency on battery charge: 96.7%
- Maximum battery discharge efficiency: 96.7%
- CEC efficiency: 97.5%
- Maximum output power: 10000W
- Nominal output voltage: 230V
- Nominal output current at 230V: 15.9A
- Output frequency:50Hz/60Hz
Safety & Protection
- Overvoltage protection: Yes
- Magnetic insulation: Yes
- Ground monitoring: Yes
- Mains protection: Yes
- Feed-in monitoring: Yes
- Feedback current monitoring: Yes
- fault current detection: Yes
- Islanding protection: Yes
- Overload protection: Yes
- Overheating protection: Yes
- Operating temperature -25°C to +60°C
- Length: 20 cm
- Width: 53 cm
- Height: 60 cm
- Weight: 31 kg
- Protection class: IP 65
- Noise emissions: <35 dB
- Product warranty: 5 years
KKTHVB10.24 Battery storage unit
The system can be upgraded to up to 4 battery storage units. In the best case, all batteries are commissioned at the same time, otherwise the ageing effects will have a negative impact on the performance of the newer batteries. Please take this into account when calculating your electricity consumption.
Depending on availability, the model offered or an identical model with a different designation may be supplied.
- -Height: 85 cm
- -Width: 57 cm
- -Length: 20.3 cm
- -Weight: 90 kg
- -Battery type: lithium iron phosphate (LiFePO4)
- -Total capacity: 10.24 kWh
- -Discharge efficiency (DoD): 80
- -Nominal voltage: 256 VDC
- -Nominal capacity: 40 Ah
- -Voltage range: 200 - 292 VDC
- -Life cycles: 3500 (25°C)
- -Communication interfaces: RS485, CAN
- -Operating temperature range: 0°C to 55°C
- -Storage temperature range: -20°C to 50°C
- -Warranty: 8 years
High-performance solar module SP415-01
This premium PV module with 415 Wp output and a particularly high module efficiency of 22.2% offers a better energy yield than modules with lower efficiency, even in low light conditions.
Thanks to the high output and efficiency, you save up to 180,- EUR electricity costs per panel per year.*
The innovative shingle technology and high load capacity reliably increase performance and minimise losses due to shading. Due to the 10 shingles arranged one above the other, only the shaded shingles do not generate electricity in the event of shading.
This module is equipped with PERC technology, which increases module efficiency: a special layer on the back of the module reflects part of the light back again. Particularly in weak and diffuse light in the morning and evening hours, modules with PERC technology achieve a higher output.
The solar module's low temperature coefficient of -0.35 % guarantees optimal power output even on hot days.
The excellent anti-PID performance is prevented by optimised production processes and strict quality control to avoid power losses in humid weather.
Due to the "Hot-Spot-Protect" quality assurance process, all shingles of the module are guaranteed hot-spot free.
The PV panel is 171.9 cm long, 114 cm wide and 3 cm high. The tempered glass front panel with anti-reflective coating and the robust black aluminium frame ensure the best stability, even in strong winds (up to 2400 Pa) and heavy snow loads (5400 Pa). The module can be securely mounted with standard mounting systems.
Modules can be easily connected to each other with the MC4 connector system.
Delivery is by forwarding agent free kerbside (the modules are not carried into the home). The carrier will contact you via e-mail to arrange a delivery date.
- Depending on availability, the model offered or an identical model with a different designation may be delivered.
- Due to the currently very high demand, this item is usually sold out before receipt of goods due to advance sales.
- Therefore, pre-order now at a favourable price and benefit from the currently relatively low purchase costs. The price may be higher at a later date.
Technical data PV module SP415-01
- Cell type: PERC, monocrystalline
- Number of shingles: 10
- Module size: 171.9 x 114 x 3 cm
- Weight: 19 kg
- Nominal power: 415 Wp
- Nominal voltage: 38.7 V
- Nominal current:10.73 A
- Open-circuit voltage: 45.9 V
- Module efficiency: 22.2 %
- Outer pane: Tempered glass with anti-reflective Coating
- Frame: Black Aluminium
- Connection: MC4 compatible
- Operating temperature: -40°C to +85°C
- Temperature coefficient Pmax: -0.35 %/°C
- Temperature coefficient Voc: -0.26 %/°C
- Temperature coefficient Isc: +0.048 %/°C
- NMOT: 43 ± 2 °C
- Product warranty: 15 years
- Performance guarantee: 30 years
*The annual savings per panel were calculated on the basis of an output of up to 440 kWh per year and an energy price of 40 cents/kWh with optimal module orientation. With higher or rising electricity prices, the savings per photovoltaic module will increase.
Safety note: This system may only be connected by a certified electrician.