Note on the Value Added Tax Act
By sending the order, the ordering person declares that the conditions according to the Value Added Tax Act §12 para. 3 are fulfilled. According to this assumption, the stated final price includes 0% VAT.
For buyers who do not fulfil the conditions according to the Value Added Tax Act §12 Para. 3, the stated price includes 19% VAT.
Micro Inverter 600 W WiFi Deye SUN600G3-EU-230
The Deye SUN600G3-EU-230 is the ideal micro-inverter for balcony power plants. It converts PV power generated by balcony power plants or roof systems in line with the grid and feeds it directly into the house grid, where it is then used immediately. This inverter is mounted directly under a PV module and is only responsible for the connected modules. Through MPPT technology (Max Power Point Tracking), the power of your photovoltaic panels is optimally utilised. By connecting several micro-inverters together, the solar system can also be expanded afterwards without any problems. Since the connected module power per inverter may be 880 W, a high output power can be generated more or longer in combination with e.g. 2 x 440 W modules than if 2 x 300 W modules are connected. As the output power is limited to 600 W, no electrician is required for the installation.
The DEYE inverter is configured in such a way that it downloads the latest firmware update via the WLAN and sets it up itself approx. 30 minutes after being connected to the home WLAN. This installs all the security improvements that have become necessary in the previous weeks.
The Deye micro-inverter converts direct current from connected PV modules into alternating current and can be directly integrated into the power circuit. The electricity fed into the grid is thus used immediately and reduces the amount of electricity drawn from the public grid.
The electronics of the Deye micro-inverters are state-of-the-art and already offer integrated energy measurement via App and WiFi. For this purpose, you can integrate the inverter into your home WLAN and monitor the energy generation via smartphone. The maximum continuous input current (DC) is 13A, so the Deye micro inverters are already equipped for solar modules up to 400W.
The micro-inverter is certified according to VDE-AR-N-4105:2018 and can be legally operated in Germany. It includes NA protection and thus switches off immediately when disconnected from the mains.
A system with this micro inverter can be expanded with additional micro inverters at any time. For this purpose, you can connect additional micro-inverters to the existing bus cable with a Betteri plug.
The Deye SUN600G3-EU-230 is built into a robust aluminium die-cast housing, which is equipped with distinctive cooling fins to dissipate heat. Due to its location directly under solar modules, good thermal management is important for the longevity of micro-inverters.
Balcony power plants
With its output power of 600W, together with its VDE certification, the inverter meets the criteria for connection as a mini PV/plug-in solar/balcony power plant. Please observe the VDE and your grid operator's instructions for Operation.
The inverter is dust-proof, submersible against water (IP67) and can be mounted directly on the solar module or mounting profile. The connection is very simple with a plug connection. If you wish to operate the system with a Wieland plug and feed-in socket, you have the option of purchasing these separately from a retailer and having the plug converted by a qualified electrician.
The BC01 Female connector from Betteri (MPN BC01B) is included and can be used as an alternative for connection to the Deye inverter. The opposite side can be connected to a H07RN-F rubber hose cable with a diameter of 10-14mm. It is a three-pole socket made of UV-resistant material. In addition, it is dustproof and waterproof according to protection class IP68 and thus suitable for indoor and outdoor use.
The Deye micro-inverter achieves an efficiency of up to 96.9% and offers fast separate MPPT tracking for each solar module. This enables optimum yield even when the modules are partially shaded and in all weather conditions.
A WiFi module is integrated for easy monitoring. The inverter connects to your home WLAN network and records the current power. With the SOLARMAN app, you can then track the generation live and visualise and analyse it over time. So no other devices are needed to measure energy!
Mounting material is not included in the scope of delivery
Depending on availability, the model offered or an identical model with a different designation may be supplied.
The product meets the requirements of VDE-AR-N 4105, among others.
- Number of MC4 connections: 2 sets
- Maximum input power: 2 x 440 W (power above 420W is not processed)
- Maximum input voltage: 60 V
- Maximum input current: 2x 13 A
- Peak efficiency: 96.9
- Maximum output power: 600 W (for standard-compliant registration with the grid operator)
- Nominal output voltage: 230 V
- Nominal output current at 230 V: 2.6 A
- Output frequency: 50 Hz / 60 Hz
- Operating temperature: -40°C to +60°C
- Length: 4 cm
- Width: 21.2 cm
- Height: 22.9 cm
- Weight: 3.5 kg
- Protection class: IP 67
- Warranty: 10 years
WEEE Reg. No. DE22791629
according to the Electrical and Electronic Equipment Act (ElektroG)
Note: The SUN-AK5 connection cable with Schuko plug is required for the power Connection.