This offer already includes the VAT rate of 0% for photovoltaic products valid from 01.01.2023, as delivery will only take place in 2023.
10 kW Hybrid Inverter HKW10-1P3
This highly efficient hybrid inverter is suitable for private and commercial photovoltaic systems with an output of up to 10 kWp and a high-voltage battery storage system.
The power feed into the grid can be set variably between 0% and 100%. Operation without grid feed-in is possible.
The performance data can be conveniently read on the device or on the app.
In conjunction with the KKTHVB10.24 battery storage, the energy generated during the day is stored and can then be consumed at night.
The 3-phase emergency power function: In the event of a power failure, the hybrid inverter switches off the grid and switches to island operation. Within approx. 6 seconds after the power interruption, three phases in the domestic grid are supplied with power again. All relevant emergency power consumers, such as heating and lighting, can thus be connected to different phases. In isolated operation, all three phases are supplied with power until the batteries are empty.
The hybrid inverter is black-start capable. If the batteries are empty, the inverter switches off and restarts without mains power as soon as the PV modules have recharged the batteries. As a rule, the system generates enough power even in winter to keep the heating and lights working all the time.
- Maximum input power (DC): 15000W
- Maximum input voltage (DC): 1000V
- Maximum input current: 13 A
- MPPT voltage range: 180V - 850V
- Nominal voltage: 360V
- Number of MPP trackers: 2
- Strings per MPP tracker: 1
- Peak efficiency: 99.6%
- Maximum efficiency on battery charge: 96.7%
- Maximum battery discharge efficiency: 96.7%
- CEC efficiency: 97.5%
- Maximum output power: 10000W
- Nominal output voltage: 230V
- Nominal output current at 230V: 15.9A
- Output frequency:50Hz/60Hz
Safety & Protection
- Overvoltage protection: Yes
- Magnetic insulation: Yes
- Ground monitoring: Yes
- Mains protection: Yes
- Feed-in monitoring: Yes
- Feedback current monitoring: Yes
- fault current detection: Yes
- Islanding protection: Yes
- Overload protection: Yes
- Overheating protection: Yes
- Operating temperature -25°C to +60°C
- Length: 20 cm
- Width: 53 cm
- Height: 60 cm
- Weight: 29 kg
- Protection class: IP 65
- Noise emissions: <35 dB
- Product warranty: 5 years