This offer is aimed at private buyers with a system size of less than 30KWp. For this, the legislator provides for a VAT rate in Germany of 0%. Commercial buyers and buyers with a system size of more than 30KWp are subject to a VAT rate of 19%.
This balcony power plant consists of the SUN600G3-EU-230 inverter from Deye with connection cable and plug as well as the high-performance solar module SP415-01. You thus receive a plug-in, fully-fledged balcony power plant that leaves nothing to be desired. A suitable and easy-to-install mounting system can be ordered as an Option.
Micro Inverter 600 W WiFi Deye SUN600G3-EU-230
The Deye SUN600G3-EU-230 is the ideal micro-inverter for balcony power plants. It converts PV power generated by balcony power plants or roof systems in line with the grid and feeds it directly into the house grid, where it is then used immediately. This inverter is mounted directly under a PV module and is only responsible for the connected modules. Through MPPT technology (Max Power Point Tracking), the power of your photovoltaic panels is optimally utilised. By connecting several micro-inverters together, the solar system can also be expanded afterwards without any problems. Since the connected module power per inverter may be 880 W, a high output power can be generated more or longer in combination with e.g. 2 x 440 W modules than if 2 x 300 W modules are connected. As the output power is limited to 600 W, no electrician is required for the installation.
The DEYE inverter is configured in such a way that it downloads the latest firmware update via the WLAN and sets it up itself approx. 30 minutes after being connected to the home WLAN. This installs all the security improvements that have become necessary in the previous weeks.
The Deye micro-inverter converts direct current from connected PV modules into alternating current and can be directly integrated into the power circuit. The electricity fed into the grid is thus used immediately and reduces the amount of electricity drawn from the public grid.
The electronics of the Deye micro-inverters are state-of-the-art and already offer integrated energy measurement via App and WiFi. For this purpose, you can integrate the inverter into your home WLAN and monitor the energy generation via smartphone. The maximum continuous input current (DC) is 13A, so the Deye micro inverters are already equipped for solar modules up to 400W.
The micro-inverter is certified according to VDE-AR-N-4105:2018 and can be legally operated in Germany. It includes NA protection and thus switches off immediately when disconnected from the mains.
A system with this micro inverter can be expanded with additional micro inverters at any time. For this purpose, you can connect additional micro-inverters to the existing bus cable with a Betteri plug.
The Deye SUN600G3-EU-230 is built into a robust aluminium die-cast housing, which is equipped with distinctive cooling fins to dissipate heat. Due to its location directly under solar modules, good thermal management is important for the longevity of micro-inverters.
Balcony power plants
With its output power of 600W, together with its VDE certification, the inverter meets the criteria for connection as a mini PV/plug-in solar/balcony power plant. Please observe the VDE and your grid operator's instructions for Operation.
The inverter is dust-proof, submersible against water (IP67) and can be mounted directly on the solar module or mounting profile. The connection is very simple with a plug connection. If you wish to operate the system with a Wieland plug and feed-in socket, you have the option of purchasing these separately from a retailer and having the plug converted by a qualified electrician.
The Deye micro-inverter achieves an efficiency of up to 96.9% and offers fast separate MPPT tracking for each solar module. This enables optimum yield even when the modules are partially shaded and in all weather conditions.
A WiFi module is integrated for easy monitoring. The inverter connects to your home WLAN network and records the current power. With the SOLARMAN app, you can then track the generation live and visualise and analyse it over time. So no other devices are needed to measure energy!
Mounting material is not included in the scope of delivery
Depending on availability, the model offered or an identical model with a different designation may be supplied.
The product meets the requirements of VDE-AR-N 4105, among others.
- -Number of MC4 connections: 2 sets
- -Maximum input power: 2 x 440 W (power above 420W is not processed)
- -Maximum input voltage: 60 V
- -Maximum input current: 2x 13 A
- -Peak efficiency: 96.9
- -Maximum output power: 600 W (for standard-compliant registration with the grid operator)
- -Nominal output voltage: 230 V
- -Nominal output current at 230 V: 2.6 A
- -Output frequency: 50 Hz / 60 Hz
- -Operating temperature: -40°C to +60°C
- -Length: 4 cm
- -Width: 21.2 cm
- -Height: 22.9 cm
- -Weight: 3.5 kg
- -Protection class: IP 67
- -Warranty: 10 years
WEEE Reg. No. DE22791629
according to the Electrical and Electronic Equipment Act (ElektroG)
Note: The SUN-AK5 connection cable is included in this set.
KKT KOLBE high-performance solar module SP415-01
This premium PV module with 415 Wp output and a particularly high module efficiency of 22.2 % offers a better energy yield than modules with lower efficiency, even in low light conditions.
Thanks to the high performance and efficiency, you save up to 180,- EUR electricity costs per panel per year.*
The innovative shingle technology and the high load capacity reliably increase the output and minimise losses due to shading. Due to the 10 shingles arranged one above the other, only the shaded shingles do not generate electricity in the event of shading.
This module is equipped with PERC technology, which increases module efficiency: a special layer on the back of the module reflects part of the light back again. Particularly in weak and diffuse light in the morning and evening hours, modules with PERC technology achieve a higher Output.
The solar module's low temperature coefficient of -0.35 % guarantees optimal power output even on hot days.
The excellent anti-PID performance is prevented by optimised production processes and strict quality control to avoid power losses in humid weather.
The "Hot-Spot-Protect" quality assurance process guarantees that all shingles of the module are hot-spot free.
The PV panel is 171.9 cm long, 114 cm wide and 3 cm high. The tempered glass front panel with anti-reflective coating and the robust black aluminium frame ensure the best stability, even in strong winds (up to 2400 Pa) and heavy snow loads (5400 Pa). The module can be securely mounted using standard mounting systems. The mounting system is not included in the scope of delivery.
With the MC4 connector system, modules can be easily connected to each other.
The delivery is made by a forwarding agent free kerbside (the modules are not carried into the flat). The forwarding agent will contact you by e-mail to arrange a delivery date.
- Depending on availability, the model offered or an identical model with a different designation may be supplied.
- Due to the currently very high demand, this item is usually sold out even before receipt of goods due to the advance sale.
- Therefore, pre-order now at a favourable price and benefit from the currently relatively low purchase costs. The price may be higher at a later date.
Technical data PV module SP415-01
- Cell type: PERC, monocrystalline
- Number of shingles:: 10
- Module size: 171.9 x 114 x 3 cm
- Weight: 19 kg
- Nominal power: 415 Wp
- Nominal voltage: 38.7 V
- Nominal current:10.73 A
- Open-circuit voltage: 45.9 V
- Module efficiency: 22.2
- Outer pane: Tempered glass with anti-reflective Coating
- Frame: Black Aluminium
- Connection: MC4 compatible
- Operating temperature: -40°C to +85°C
- Temperature coefficient Pmax: -0.35 %/°C
- Temperature coefficient Voc: -0.26 %/°C
- Temperature coefficient Isc: +0.048 %/°C
- NMOT: 43 ± 2 °C
- Product warranty: 15 years
- Performance guarantee: 30 years
You still need a mounting system? The following mounting systems are available:
SPMS01 Tiled roof mounting set for 1 module
SPMS02 Tiled roof mounting set for 2 modules
SPMS03 Adjustable mounting for 2 modules
SPMS04 Adjustable mounting Flat roof for 2 modules
BALKON10 Balcony Assembly Set for round railings
BALKON20 Balcony Assembly Set for angular railings
How do I compare prices for balcony power plants?
The purchase price of balcony power plants is calculated in watts.
Example balcony power plant from KKT KOLBE:
Purchase price: 899.99 €
Output: 850 Wp
Calculation: 899.99 € / 850 Wp ~ 1.06 €/Wp
Competitor balcony power plant:
Purchase price: 1049.99 €
Output: 770 Wp
Calculation path: 1049.99 € / 770 Wp ~ 1.36 €/Wp
Pay attention to the price per watt peak (€/Wp), competitors are often 30 - 50 % more expensive.
*The annual savings per panel were calculated on the basis of an output of up to 440 kWh per year and an energy price of 40 cents/kWh with optimal module orientation. With higher or rising electricity prices, the savings per photovoltaic module increase.
**For the exact amount of subsidies and possible conditions, please contact your local government or advice centres.
Information video on the subject of balcony power plants
Information video on registration in the Market Master Data Register (MaStR)
Balkonkraftwerke einfach erklärt